Transcription of numbers and codes Afishuesi i rubrikës: Soňa Tůmová de Núñez
|
|---|
Is it necessary to transcript manually each and every number of the listings like bank accounts (number of transaction) or study certificates with codes of different subjects and so on? Or is it possible to refer to the original ("see ...")?
| | | | Kang Seok Lee
Koreja e Jugut
Local time: 11:37
Anëtar qysh 2018
anglisht në koreanisht
+ ...
| It depends on the conditions | Oct 3, 2018 |
Hi Sona
I think it depends on the conditions of translation/transcription.
All numerical data mostly does not need manual transcription because the reader of the target language(translated) should not have any difficulty in understanding the data. But if there is any special request like do not show the numerical data in the translated document, you need to make some manual transcription.
If no, referring to the original document is usually of no issue, I think.
Ch... See more Hi Sona
I think it depends on the conditions of translation/transcription.
All numerical data mostly does not need manual transcription because the reader of the target language(translated) should not have any difficulty in understanding the data. But if there is any special request like do not show the numerical data in the translated document, you need to make some manual transcription.
If no, referring to the original document is usually of no issue, I think.
Cheers!
KS(Stefano) Lee ▲ Collapse
| | | | Marjolein Snippe 
Holandë
Local time: 04:37
Anëtar qysh 2012
anglisht në holandisht
+ ...
| deliver a finished document | Oct 3, 2018 |
I would not usually (there may be exceptions although I haven't met any yet) refer to the original, but try to deliver a finished document. If I ordered a professional translation, I would not expect to have to go back to the original file to see the numbers/codes.
If you use a CAT tool, this should not be an issue - either the numbers get transferred automatically or you can do so with a minimal amount of work, such as using a shortcut key to copy the source into the target segment... See more I would not usually (there may be exceptions although I haven't met any yet) refer to the original, but try to deliver a finished document. If I ordered a professional translation, I would not expect to have to go back to the original file to see the numbers/codes.
If you use a CAT tool, this should not be an issue - either the numbers get transferred automatically or you can do so with a minimal amount of work, such as using a shortcut key to copy the source into the target segment.
If you don't use a CAT tool, would it be easier in this type of text to work in the original document and save it under a different name ("Originalname_CZ" or so), so you don't have to transfer/copy&paste anything?
Hope this helps - good luck! ▲ Collapse
| | | | | If PDF documents | Oct 3, 2018 |
I mean when you work with PDF scanned documents. OCR doesn´t work well with many of them, so you have to transcript pages full of long number combinations that nobody really reads after the translation is made.
| | |
|
|
|
Robert Forstag
Shtetet e Bashkuara të Amerikës
Local time: 22:37
spanjisht në anglisht
+ ...
As Marjolein, points out, you would normally be expected to translate or transcribe everything that appears in the original. This includes letterhead and footer text, handwritten notes or initials added to a typed text and - yes - strings of numbers appearing at the bottom of the page. This is most especially true of any translation likely to be presented as evidence in a court of law.
But you can ask the client at the time of assignment if you can omit material like this (wh... See more As Marjolein, points out, you would normally be expected to translate or transcribe everything that appears in the original. This includes letterhead and footer text, handwritten notes or initials added to a typed text and - yes - strings of numbers appearing at the bottom of the page. This is most especially true of any translation likely to be presented as evidence in a court of law.
But you can ask the client at the time of assignment if you can omit material like this (which is, as you indicate, extraneous to the translation, and which takes you extra time to deal with).
If you are told that you must include such stuff, you can cut and paste the images of bar codes, long numbers, company contact info in footers, etc. from the pdf doc into your translation, and this will save you some time. ▲ Collapse
| | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Transcription of numbers and codes | LinguaCore | AI Translation at Your Fingertips
The underlying LLM technology of LinguaCore offers AI translations of unprecedented quality. Quick and simple. Add a human linguistic review at the end for expert-level quality at a fraction of the cost and time.
More info » |
| | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news
